Advanced Tab

User Settings

Note

Changes will not be applied if you do not click “Apply changes.”

User Setting Box

Time scopes span [s]

This parameter determines the time span, or x-axis, on the timeseries plots throughout the bossapp. Toggling "Grids" below determines if these plots will have grids.

Spectrum Buffer [s]

This parameter allows you to change the length of the Spectrum Buffer used in the "Spectrum" tab.

Phase error buffer [s]

This allows you to change the length of the Phase error Buffer used in the "Phase Estimation Accuracy" tab.

Create log file/include target log

If you contact support, they may ask you to check these boxes and share the logs.

Apply Changes/Restore default

You must click "Apply Changes" for your updated parameters to be applied. "Restore default" will updated parameters to the default values of the bossapp.

Signal/Value table

This table is currently disabled for end users.

Target Box

Reboot Target

This button reboots the bossdevice RESEARCH. If the bossdevice is not connected, you will receive an error message.

Update dependencies on bossdevice

This button updates the bossdevice RESEARCH (sends updates to the bossdevice hardware, not the control computer). If the bossdevice is not connected, you will receive an error message.